IZAR PORT PULSE

IZAR PORT PULSE

M-BUS | CONVERTER

The IZAR PORT PULSE offers the possibility to connect resource meters with pulse output to an M-Bus network (transformation of pulses to M-Bus protocol). It is suitable for all meter types with pulse transmitter, open collector or current loop (S0) output.

  • Two independent pulse counters
  • Configuration via M-Bus interface or optical ZVEI interface using HYDRO-PORT software
  • Physical unit and medium programmable for each input
  • Pulse divisor programmable for each input
  • Power supply via M-Bus, battery supply to continue pulse counting if M-Bus fails
  • External power suppy input for connecting meters with current loop (S0) output
  • Principle of operation

    The IZAR PORT PULSE consists of an electronic unit that collects meter information in the form of pulses. These pulse counts are converted into physical units. The data is transmitted via M-Bus protocol to a data concentrator (M-Bus Master IZAR CENTER).

  • General
    HousingDark-grey rail mount housing with fuse profile made of heat resistant plastic
    Cable lengthMax. 1.5 m for connecting pulse transmitter / open collector
    InterfacesM-Bus output; input for external power supply; at a time 2 inputs for pulse (voltage-free) and current loop (S0) contacts; optical ZVEI interface
    ConfigurationVia ZVEI or M-Bus and HYDRO-PORT software (free of charge)
  • Technical data
    Power supplyVia M-Bus or Lithium battery 3.6 V
    Power supply (S0)V DC24
    Pulse frequencyHzMax. 50
    Pulse widthmsMin. 7.5
    Weightg150
    Protection classIP 20
  • Ambient conditions
    Humidity%10 ... 70
    Temperature range°C0 ... 60
  • Dimensions
    LengthLmm71
    WidthBmm86
    WidthB1mm49
    WidthB2mm32
    HeightHmm60
    HeightH1mm49
    HeightH2mm32