IZAR PULSE I
ELECTRONIC ACCESSORY | TRANSMITTER
IZAR PULSE i is a pulse emitter that can be clipped onto all the water meters of the Diehl Metering inductive modular range (Ti) making them communicative in a very easy way.
IZAR PULSE i generates pulses to manage the water volume and features fraud alarms. It can be connected to remote reading or consumption analysis systems.
IZAR PULSE i features a clamping ring for secured fixing and easy re-mounting on another meter.
- Compatible with inductive modularity "Ti"
- 3 and 4-wires versions available
- Several configurations possible on request
- Flow direction management
- Tampering alarms
- Open collector output
- Available in dry-contact version, specific pulse weights and 3-output version
- Up to 15 years lifetime
IZAR PULSE i is a ring equipped with a sensor based on the inductive principle and with a specific electronic system that exploits the information to be transmitted in the form of an open-collector signal (polarised).
The inductive system featured in IZAR PULSE i is actuated using a metal ½ disc located in the Diehl Metering modular register of the water meter.
Cable length 1.5 m (3-wires version) / 5 m (4-wires version)* Power supply Lithium battery 3.6 V Battery lifetime Up to 15 years ** Output Maximum current values : 50 mA | Maximum voltage values : 30V Pulse duration 50 ... 500 ms Pulse ratio 1:1 litre | 1:10 litre | 1:100 litre *** Maximum frequency Hz 8 Open collector output impedance > 1MΩ Standards 2014/30/UE Directive, CE* May vary by up to +/- 1.5% due to manufacturing tolerances.
** Standard conditions of use and temperature. Theoretical life, with no guarantee.
*** Other values on request
Operating temperatures range °C -15 ... +55 Storage temperatures range °C -20 ...+70 Ambient humidity % 0 ... 100 Degree of protection IP 68
Meters Diehl Metering inductive modular range "Ti".