WESAN WS G is a bulk water meter designed for measuring volumes of cold water (up to 50°C) in supply lines with high flow at low pressure loss. Modular, WESAN WS G DN50 to 150 can be fitted at any time with an IZAR clip-on module converting it into a communicating meter ready for mobile or fixed network (radio/wired) reading.
The measuring chamber can be replaced without removing the meter from the pipe.


  • DN50/65/80/100/150
  • Q3=25m3/h (DN50) / Q3=40m3/h (DN65) / Q3=63m3/h (DN80) / Q3=100m3/h (DN100) / Q3=250m3/h (DN150)
  • MID approval up to R=40
  • For horizontal installation
  • Calibratable and exchangeable measuring insert
  • Sealed measuring insert for better accuracy
  • Encapsulated and rotating glass/copper register, IP 68
  • Hydraulic bearing relief
  • Protection against magnetic fraud
  • General
    Medium temperature range°C+1 ... +30
    Temperature safety°C+1 ... +50
    Ambient operating temperature°C+1 ... +55
    Ambient storage temperature°C+1 ... +55
    Nominal pressurePNbar161
    Protection classIP 68
    1 see also special versions
  • Technical data
    Nominal diameterDNmm506580100150
    Permanent flow rateQ3m3/h254063100250
    Minimum flow rateQ1m3/h0.6311.582.56.25
    Transitional flow rateQ2m3/h11.62.52410
    Overload flow rateQ4m3/h31.255078.75125312.5
    Starting flow ratel/h60609090150
    Flow rate at 0.1 bar pressure lossm3/h21225560143
    Pressure loss at Q3bar0.140.340.130.280.31
  • Approval
    Nominal diameterDNmm506580100150
    MID (A 0445/3505/2011)
    Dynamic range (Q3/Q1)R40•H40•H40•H40•H40•H
    Sanitary conformityKTW / W270KTW / W270KTW / W270KTW / W270KTW / W270
  • Display range
    Nominal diameterDNmm506580100150
    0.5 l ... 999,999 m³
    5.0 l ... 9,999,999 m³
  • Dimensions
    Nominal diameterDNmm506580100150
    Overall length (DIN 19625)Lmm270300300360430 / 500
    Overall length (DIN ISO 4064)Lmm300300350350500
    Flange diameterDmm165185200220285
    Hole circle diameterKmm125145160180240
    Number of screwholespcs444 / 888
    Screwhole diameterD1mm1818181823
    Height to remove measuring insertmm240240330340620
    DiameterØ Bmm110110110110110
    Meter widthmm173173239239310
  • Special versions

    On request:
    - Versions with different nominal pressure
    - Flange for ANSI and BS
    - Special pulse values
    - Special overall lengths

  • Presure loss graph / Typical error graph

You are currently using an outdated Internet browser, which is no longer supported for technical reasons. To use the Diehl website right, please use a modern browser in the latest version, such as Edge, Chrome, Firefox or Safari.


We would like to use Google Analytics to optimise the design of our website. Through this, Google collects data which is aggregated and made available to us as a statistical overview. By clicking "Agree", you consent to tracking by Google Analytics. This consent is voluntary and can be revoked at any time. If you click "Decline", no tracking will take place. For more information, please see our privacy policy.