IZAR PULSE H
The pulse transmitter IZAR PULSE H is at the core of the modular concept of the IZAR radio family. It can be clipped onto all the meters of the modular range "Hall" (blue ring) in a few seconds to turn them into communicating meters.
The IZAR PULSE H uses a Hall sensor and allows to determine the flow volume in both directions.
IZAR PULSE H offers a number of alarms against magnetic tampering, unauthorised unclipping of module and cable cut off.
IZAR PULSE H is powered by a lithium cell and can be connected to remote reading system.
- Compatible with modularity Hall
- Versions 3 and 4 wires
- Management of direction flow
- Tampering alarms
- Open collector output
- Up to 15 years lifetime
Sensor Hall principle Physics Revolving magnetic field detection Type NPN, open collector transistor
Number of wires 3 / 4 Cable length m 1.5 / 5 Power supply Lithium cell Electric parameters : Max. output voltage V 30 Electric parameters : Max. output current 0.5 µA (open status) / 100mA (closed status) Max. frequency Hz 8 GND brown wire [-] Pulse white wire [+] Tampering green wire [+] Flow direction 3 wires Takes account of backflows, with up to 500 pulses per return Flow direction 4 wires yellow wire [+] Electromagnetic compatibility Complies with the European Directive relating to electromagnetic compatibility (cable length up to 5 metres) Pulse weight : 1 liter * mm DN15 ... DN40 Pulse weight : 10 liters * mm DN50 ... DN100 Operating temperature °C -15 ... +55 Protection class IP 68*others values on request