IZAR RADIO EXTERN PULSE

IZAR RADIO EXTERN PULSE

RADIO MODULE

IZAR RE PULSE radio module is designed for remote meter reading in mobile or fixed network mode. IZAR RE PULSE can easily be connected to meters equipped with pulse emitters, open collector interfaces NPN or dry contact.
IZAR RE PULSE transmits the meter index and alarms every 8 seconds via a unidirectional radio link enabling an efficient drive-by reading at 50 km/h and an accurate fixed network.
IZAR RE PULSE offers multiple functions (historical index value, remaining battery lifetime...) and alarms (leaks detection, meter stopped, backflow...).

  • Easy installation
  • For all types of meters with dry contact or open collector interface
  • Available in 868 MHz and 434 MHz
  • IP 68
  • Battery powered with a lifetime of up to 15 years
  • Leak detection and transmission of alarm
  • Principle of operation

    IZAR RE PULSE collects information coming from a pulse emitter or a meter equipped with a pulse output and transmits in real time the index and other operating information every 8 seconds in R3 mode.

    Mobile reading in Walk-by / Drive-by / Passive Drive-by :
    The data sent by IZAR RE PULSE is collected using either a Diehl Metering handheld computer or a tablet equipped with an IZAR RECEIVER BT for Walk-by/Drive-by or an IZAR RDC VEHICLE for passive Drive-by. Data is then transferred directly to a centralized monitoring system.

    Fixed network:
    A fixed receiver IZAR RDC STANDARD/IZAR RDC BATTERY (fixed network R3) installed in buildings will collect the data and send it at predefined intervals via GPRS or LAN to a centralized server. Reading through M-Bus application with an IZAR CENTER associated to an IZAR RECEIVER M-BUS and IZAR@NET 2 software is also possible.

  • Technical data
    Radio protocolPRIOS
    FrequencyMHz868.95 | 434.475
    ModulationFSK
    Transmission power16 mW (868 MHz) | 10 mW (434 MHz)
    Transmission modeUnidirectional
    Radio rangeUp to 500 m depending on conditions of use
    Programming interfaceOptical IrDa
    ApprovalEN 60950 | EN13757-3/-4
    Power supplyLithium battery 3.6 V
    Battery lifetimeUp to 15 years*
    Data updateIn real time
    Sending interval8 s
    Input frequencyHz8 max
    Min. input pulse durationms50
    AlarmsLeakage, tamper detection, ...
    *Standard conditions of use and temperatures. Theoretical lifetime, not guaranteed.
  • Ambient conditions
    Operating temperatures°C-15 ... +55
    Storage temperatures°C-20 ... +70
    Humidity%0 ... 100
    Protection classIP68
  • Optical interface
    Programmable valuesRadio activation | Serial number | Meter index | Fluid type measured | Historical index intervals
  • Dimensions
    LengthLmm104
    WidthBmm83
    HeightHmm42
    HeightH1mm34