AQUILA V5

Single-Jet Meter

Application

AQUILA V5 is a bulk water meter designed for water network management and invoicing of substantial quantities of cold water.
It is characterised by its very high measuring dynamic, insensitivity to disturbance and easy maintenance. Its modular rotating flanges make it easy to install on any type of pipe, even when resizing is necessary.
Developed within the framework of the MID, AQUILA V5 complies with the European regulations and holds sanitary conformity certificates.
AQUILA V5 can be fitted at any time with an IZAR clip-on module converting it into a communicating meter ready for mobile reading (walk-by, drive-by, passive drive-by) or fixed network reading (radio/wired).

Features

  • DN50/65/80/100
  • Q3=25m3/h (DN50) / Q3=40m3/h (DN65) / Q3=63m3/h (DN80) / Q3=100m3/h (DN100)
  • MID approval up to R=800
  • Starting flow rate: 18 l/h (DN50)
  • Cast-iron body
  • Metrological data
    Nominal diameterDNmm506580100
    LengthLmm300300350350
    Nominal flow rateQ3m3/h254063100
    R standard*Q3/Q1315315315315
    Starting flow ratel/h18283138
    Minimum flow rateQ1l/h80127200317
    Transition flow rateQ2l/h127203320508
    Maximum flow rateQ4m³/h31.255078.75125
    Head loss at Q3bar0.470.610.430.60
    Head loss at Q4bar0.740.990.770.92
    Kvs (deltaP=Q²/Kvs²)36.3850.2389.63130.18
    * other values on request
  • Approval
    MID approvalLNE - 10913 | C1 type
    StandardsEN 14154 | ISO 4064 | OIML R49
    Sanitary conformityACS | WRAS | PZH
  • Temperature and pressure
    Water temperature°C0.1 ... +50
    Ambient operating temperature°C1 ... +55
    Storage temperature°C-10 ... +55
    Nominal pressurePNbar16 (additional PN20 for DN50)
  • Dimensions
    Nominal diameterDNmm506580100
    LengthLmm300300350350
    Width at the axisbmm105105150150
    WidthBmm187198250260
    HeightHmm171171204204
    Heighth1mm80809898
    Flange diametermm164186200220
    HousingCast-ironCast-ironCast-ironCast-iron
    Weight (meter + flanges PN16)kg8.49.614.816.1
  • Available flanges
    Nominal diameterDNmm506580100
    LengthLmm300300350350
    Flanges DN50 PN16---
    Flanges DN50 PN20---
    Flanges DN60-65 PN16--
    Flanges DN80 PN16--
    Flanges DN100 PN16--
    Number of screw holespcs4888
  • Precision curve - DN50/65

    This technology doesn't require straight length.

  • Precision curve - DN80/100

    This technology does not require straight length.

  • Options

    - Pressure connector
    - Different types of flanges