IZAR BE PULSE
ELECTRONIC ACCESSORY | TRANSMITTER
IZAR BASE EXTERNAL PULSE is an interface designed to be associated to a pulse emitter and a radio module to function as a remote external radio module.
IZAR BE PULSE receives information from a pulse emitter such as an IZAR PULSE i and transmits this information in an inductive mode to the radio module clipped on it, by simulating the rotation of the half-disc of the meter's register. The associated radio module transmits the index and the alarms of the meter via radio link. The lifetime of the module is up to 15 years in standard conditions of use.
- Easy installation without configuration when the module is already paired
- Compatible with all the Diehl Metering radio modules with inductive technology
- Functions as remote module when associated to a 868 MHz, 434 MHz, R4, G4 module...
- Lifetime up to 15 years
- Ensures all the functions of the associated radio module
IZAR BE PULSE collects information coming from a pulse emitter or a meter equipped with a pulse output and transmits information to the associated radio module.
Mobile reading in Walk-by / Drive-by / Passive Drive-by:
The data sent by IZAR BE PULSE + radio module is collected using either a handheld computer or tablet equipped with an IZAR RECEIVER BT for Walk-by/Drive-by or an IZAR RDC VEHICLE for passive Drive-by. Data is then transferred directly to a centralized monitoring system.
A fixed receiver IZAR RDC STANDARD/IZAR RDC BATTERY (fixed network R3) or IZAR RDC PREMIUM (long-range fixed network R4 when associated to IZAR RC i R4 or G4) installed in buildings will collect the data and send it at predefined intervals, via GPRS or LAN, to a centralized server. Reading through M-Bus application with an IZAR CENTER associated to an IZAR RECEIVER M-BUS and IZAR@NET 2 software, is possible as well.
Data update In real time Input frequency (pulses) 8 Hz maximum Pulse duration 30 ms minimum Resistance - closed contact 150 Ohms maximum Parallel capacity - closed contact 22 nF maximum Resistance - open contact 10 MOhms maximum Alarms Identical to the IZAR RC i radio module clipped on it + cable cut Standards 2014/30/UE directive | EMC Power supply Lithium battery 3.6 V Battery lifetime Up to 15 years**Standard conditions of use and temperatures. Theoretical lifetime, not guaranteed.
Note: protocol, frequency, radio range, sending intervals and functions are linked to the type of radio module clipped on the IZAR BE PULSE.
Ambient operating temperature °C -15 ... +55 Storage temperature °C -20 ... +70 Ambient humidity % 0 ... 100 Ingress Protection IP 68
Length mm 78 Height mm 43 Cable length m between 2.95 and 3m (due to manufacturing tolerance) Weight g 197
Kit IZAR BE PULSE + IZAR PULSE i
IZAR BE PULSE is also available as a factory-assembled kit with an IZAR PULSE i. The cable length can then vary between 4.95 and 5 meters due to the manufacturing tolerance. The kit is IP68 and can be submerged.
For more technical details about the IZAR PULSE i pulse emitter, refer to the IZAR PULSE i datasheet.