The ultrasonic compact energy meter can be used for measuring the energy consumption in heating or cooling application for billing purposes. The measurement principle is static and based on the measurement of the transit time. Ultrasonic technology offers many benefits: no moving parts (avoids wear and tear of the metering components), low pressure loss, large metering dynamics and low start flowrate, insensitiveness to suspended particles.
Fully electronic compact heat meter or compact cooling and heat meter with impeller scanning for recording energy and volume data. Highly accurate recording of all billing data in a heating circuit or a cooling / heating circuit at medium temperatures from 5 °C up to 90 °C. Volume measuring component (DN 15 - 20) Calculator, contains hardware and software for measuring flow rate, temperature and energy consumption Temperature sensor permanently connected in integrator
Fully electronic measuring capsule heat meter, heat and cooling meter or cooling meter with impeller scanning for volume measuring and energy calculation. Highly accurate recording of all billing data in a heating circuit or a cooling / heating circuit at medium temperatures from 5 °C up to 90 °C. • Multi-jet volume measuring component (DN 15 - 20) • Calculator, contains hardware and software for measuring flow rate, temperature and energy consumption • Temperature sensor permanently connected in integrator
The calculator SCYLAR INT M is a two-channel calculator for measuring thermal energy in heating and cooling circuits. It includes the functions of two calculators. 2 independent energy measurements can be made in one housing at the same time. It is highly suitable in an industrial surrounding. Billing-relevant data can be calculated in the range of local heating and district heating with very high precision. Due to its variety of additional functions it is also very well prepared for future requirements.
The temperature sensor pair is designed for the operation with a Diehl Metering energy calculator to measure the energy consumption in community heating networks or the like. In order to safeguard the exact measure of the temperature difference according to the European standard EN 1434, the sensors aredelivered as especially matched temperature sensor pairs. These sensor pairs are available with an MID approval for heating or with a national cooling approval.
The 2-path flowmeter SHARKY FS 475 is suitable for to measuring water flow in district heating plants, local networks, boiler stations, substations, chiller plants and other general water applications. The flowmeter SHARKY FS 475 is approved according to energy meter standards EN 1434 class 2, OIML R 75 class 2 and MID class 2. Metrological parameters are protected against manipulation.
Diehl Metering Gesmbh
Hainburger Straße 33
Telefon: +43 (1) 7 16 70-0
Telefax: +43 (1) 7 16 70-12