Products Metering Systems


Icon Metering Systems
  • Complete solutions for mobile reading and fixed network
  • Project solutions from planning to operation
  • Different communication technologies for wired and wireless applications
  • High actuality and quality of data
  • Software solutions from reading to meter data management

Productsearch

(change)






SYSTEM ENGINEERING



IZAR RADIO COMPACT HALL

IZAR RADIO COMPACT HALL

IZAR RC H radio is designed for remote meter reading. The radio operates under PRIOS protocol at a frequency of 868 or 434 MHz. It is compatible with Diehl Metering modular meters in Hall or mixed version (grey ring). IZAR RC H is easy to fit and is field programmable with the identification number of the associated meter. IZAR RC H radio module transmits the meter reading via a unidirectional radio link every 8 seconds. IZAR RC H offers a number of functions (index at anniversary date, remaining battery lifetime, etc.) and alarms (leaks, meter blocked, reverse water flow etc.). One fixed battery enables independent operation for up to 15 years of standard use.

Datasheet | Read more



IZAR RADIO EXTERN PULSE

IZAR RADIO EXTERN PULSE

IZAR RE PULSE radio is designed for remote meter reading equipped with pulse transmitters or open collector interfaces NPN. Operating under PRIOS protocol at a frequency of 868 or 434 MHz, IZAR RE PULSE is easy to fit and can be commissioned while installed with the identification number of the associated meter. IZAR RE PULSE modules transmit the meter index via a unidirectional radio link every 8 seconds and offer a number of functions (index at anniversary date, battery life...) and alarms (leaks, blocked meter, reverse flow...). One fixed battery enables independent operation up to 12 years of standard use.

Datasheet | Read more



IZAR RADIO EXTERN TEMPERATURE

IZAR RADIO EXTERN TEMPERATURE

IZAR RE TEMP radio generation operates under RealData protocol (Wireless M-Bus) at a frequency of 868 MHz. This radio is equipped with a temperature sensor with a wide measuring range (-55°C to +125°C). IZAR RE TEMP radio comes fully programmed and ready to use with an identification number. IZAR RE TEMP radio transmits the ambient as well as the minimal, maximal and average temperature over the last 6-hours period. IZAR RE TEMP can be read in mobile mode with a handheld computer together with an IZAR RECEIVER BT. In fixed network mode, reading is performed using either the IZAR RDC STANDARD/BATTERY or PREMIUM or the M-Bus IZAR CENTER installation.

Datasheet | Read more



IZAR RADIO EXTERN 868 TEMP INT

IZAR RADIO EXTERN 868 TEMP INT

IZAR RE 868 TEMP INT radio generation operates under Real Data protocol (wireless M-Bus) at a frequency of 868 MHz. This radio is equipped with a temperature sensor with a wide measuring range (-15°C to +55°C). IZAR RE 868 TEMP INT comes fully programmed and ready to use with an identification number. IZAR RE 868 TEMP INT transmits the ambient as well as the minimal, maximal and average temperature of the last 6-hours period. IZAR RE 868 TEMP INT can be read in mobile mode with a handheld computer together with an IZAR RECEIVER BT. In fixed network mode, reading is performed using either the IZAR RDC STANDARD/BATTERY or PREMIUM or the M-Bus IZAR CENTER installation.

Datasheet | Read more



IZAR RC i R4

IZAR RC i R4

IZAR Radio Compact Inductive R4 is designed for mobile reading and long-range fixed network remote reading of Diehl Metering meters. IZAR RC i R4 radio module can be clipped onto all the meters of the Diehl Metering inductive modular range (Ha+Ti or Ti), with a grey or red ring. It comprises a tamper proof sensor operating on inductive principle. Easy to fit, IZAR RC i R4 is field or factory programmable with the identification number of the associated meter. IZAR RC i R4 radio module transmits the meter reading via a unidirectional link every 8 seconds in mobile mode R3 and every 15 minutes in fixed network mode R4. IZAR RC i R4 offers multiple functions (historical index value, remaining battery lifetime...) and alarms (leaks, meter stopped, backflow...).

Datasheet | Read more



IZAR RC i G4

IZAR RC i G4

The new generation of IZAR Radio Compact Inductive G4 is designed for mobile reading and long range fixed network remote reading of Diehl Metering meters. IZAR RC i G4 module can be clipped onto all the meters of the Diehl Metering inductive modular range (Ha+Ti or Ti) with a grey or red ring. It comprises a tamper-proof sensor operating on inductive principle. Easy to fit, IZAR RC i G4 integrates the standardized OMS protocol and can be field or factory programmable. IZAR RC i G4 radio module transmits the meter reading, via a unidirectional link, in mobile mode R3 or fixed network mode R4. IZAR RC i G4 offers multiple functions (current index, 11 historical index values and detailed leaks) and alarms (meter stopped, low battery, leaks...).

Datasheet | Read more



IZAR RADIO EXTERN AIR

IZAR RADIO EXTERN AIR

IZAR RADIO EXTERN AIR measures temperature and humidity and sends information via radio, using OMS protocol. With its modern and inconspicuous design, it is especially developed for in-house application. The hybrid and flexible sending scheme allows the operation in mobile (Walk-by) and/or fixed network (wireless or wired) mode.

Datasheet | Read more



IZAR RC 868 i W R4

IZAR RC 868 i W R4

The compact inductive radio modules IZAR Waterbox R4 are at the centre of the modular inductive concept developed by Diehl Metering. They can be clipped on to all the meters of the Diehl Metering inductive modular range "Ha+Ti" or "Ti" equipped with a grey or red ring, making them easily "communicative". IZAR RC 868 i W R4 radio module is factory or on-site programmable with the identification number of the associated meter. IZAR RC 868 i W R4 transmits the meter reading via a unidirectional link in mobile mode R3 or long range fixed network mode R4. IZAR RC 868 i W R4 offers multiple functions (historical index values, remaining battery lifetime...) and alarms (leaks, meter stopped...) as well as an internal data logger readable via an IrDA interface, for consumer disputes.

Datasheet | Read more



IZAR RC 868 i W G4

IZAR RC 868 i W G4

The new generation of IZAR Radio Compact Inductive Waterbox G4 is designed for mobile remote meter reading and long-range fixed network. IZAR RC 868 i W G4 module can be clipped onto all the meters of the Diehl Metering inductive modular range (Ha+Ti or Ti), with a grey or red ring. It comprises a tamper-proof sensor operating on inductive principle. Easy to fit, IZAR RC 868 i W G4 integrates the standardized OMS protocol and can be field or factory programmable. IZAR RC 868 i W G4 radio module transmits the meter reading, via an unidirectional link, in mobile mode or fixed network. It offers multiple functions (current index, index at anniversary date...) and alarms (detailed leaks, meter blocked, low battery...).

Datasheet | Read more



IZAR RECEIVER BT

IZAR RECEIVER BT

IZAR RECEIVER BT is a radio receiver designed for mobile reading (walk-by or drive-by) of multi-energy meters. During the tour, the data collected by the receiver is transmitted to a Bluetooth® handheld terminal, such as an IZAR HANDHELD PSION WORKABOUT PRO / EP10. Self-powered, IZAR RECEIVER BT is available in 868 or 434 MHz.

Datasheet | Read more



IZAR RDC STANDARD

IZAR RDC STANDARD

IZAR RDC STANDARD is a Radio Data Concentrator dedicated to the reading of IZAR radio system. Interoperability, data logging, remote configuration and the different versions make it a core product for smart metering project with a multi-utility approach. IZAR RDC STANDARD is designed for deployment of Radio Fixed Network with automatic data transmission through GPRS or LAN technology.

Datasheet | Read more



IZAR GATEWAY GPRS BATTERY

IZAR GATEWAY GPRS BATTERY

IZAR GATEWAY GPRS BATTERY is an IZAR radio reading concentrator. It collects data transmitted by the IZAR radio fitted on water and energy meters (gas, electricity, thermal energy...). The data are sent back at programmable intervals to an FTP (File Transfer Protocol) server. IZAR GATEWAY GPRS BATTERY is self-powered by 2 interchangeable batteries allowing an optimised on-site installation. IZAR GATEWAY GPRS BATTERY can manage up to 800 meters fitted with IZAR radios. The various built-in functions enable optimal use. IZAR GATEWAY GPRS BATTERY is automatically PC-enabled, using IZAR@NET software.

Datasheet | Read more



IZAR RECEIVER M-BUS

IZAR RECEIVER M-BUS

IZAR RECEIVER M-BUS is used for fixed network reading of meters equipped with an IZAR radio. It converts the data into M-BUS format and transmits them to an IZAR CENTER M-BUS master.

Datasheet | Read more



IZAR RDC PREMIUM R4

IZAR RDC PREMIUM R4

IZAR RDC PREMIUM is the most powerful Radio Data Concentrator of the Diehl Metering product family. It makes wide area fixed networks ready for mass data transmission and network monitoring. With two high-performance radio receivers, state of the art embedded technology and an industrial design, made for harsh outdoor conditions, it contributes significantly to a reduction of concentrator locations and so to a more efficient process. A high interoperability is achieved by the conformity to Open Metering System specifications (OMS).

Datasheet | Read more



IZAR RDC BATTERY

IZAR RDC BATTERY

IZAR RDC BATTERY is a concentrator specially designed for fixed network meters reading. IZAR RDC BATTERY reads every communicating multi-energy meter (water, thermal energy, gas, electricity…) and sensors equipped with the IZAR radio technology. It then transmits the data to a data storage server at preset times. IZAR RDC BATTERY can manage up to 4,000 meters with the data directly exploitable on PC using IZAR@NET 2 or IZAR PLUS PORTAL software. IZAR RDC BATTERY is fully autonomous in energy thanks to a battery pack easily replaceable on site. An external connector enables the use of another source of energy, such as a solar one. Moreover, equipped with a SD memory card, it can operate in “data logger” mode for a more accurate analysis of the data (consumption profiles, leakage detection…).

Datasheet | Read more



IZAR RDC VEHICLE

IZAR RDC VEHICLE

IZAR RDC VEHICLE is a concentrator specially designed for passive drive-by meter reading solutions. IZAR RDC VEHICLE fits any type of vehicles (utility vehicle or other…) and reads autonomously, without driver intervention, every communicating multi-energy meter (water, thermal energy, gas, electricity…) equipped with the IZAR radio technology. Connected to the vehicle power supply, IZAR RDC VEHICLE collects automatically the data and transfer them, via a mobile network, to a data storage server. The data are then directly exploitable using the Diehl Metering IZAR@NET 2 or IZAR PLUS PORTAL management software.

Datasheet | Read more



IZAR HANDHELD Android

IZAR HANDHELD Android

IZAR HANDHELD Android is used for mobile reading and configuration of smart meters. The software IZAR@MOBILE 2 is preinstalled on the device. Data is received from the IZAR RECEIVER BT and can be transmitted to the IZAR@NET 2 or IZAR PLUS PORTAL meter management software. Meters configuration is performed with IZAR OPTO HEAD BT.

Datasheet | Read more



IZAR@MOBILE 2 TABLET

IZAR@MOBILE 2 TABLET

IZAR@MOBILE 2 TABLET is used for mobile reading and configuration of IZAR radio modules and multi-energy smart meters. The software IZAR@MOBILE 2 is preinstalled on the tablet. Reading data is received from the IZAR RECEIVER BT and transmitted to the IZAR@NET 2 / IZAR PLUS PORTAL meter management software. The configuration of system devices is performed with an IZAR OH BT.

Datasheet | Read more



IZAR@NET 2

IZAR@NET 2

IZAR@NET 2 is the Diehl Metering software solution for collecting, managing and analysing multi energy meters data provided by our different reading solutions, such as mobile, passive drive-by (garbage truck), fixed network or wired M-Bus. With its new interface, IZAR@NET 2 is a user-friendly, ergonomic and performant application allowing easy access to your multi-energy metering data (water, thermal energy, gas, electricity ...). In addition to all features for operations, IZAR@NET 2 integrates automatic analyses of your meter data and alarms with a possible e-mail notification. IZAR@NET 2 various versions and capacities offer a suitable response to your needs.

Datasheet | Read more



IZAR@MOBILE 2

IZAR@MOBILE 2

IZAR@MOBILE 2 is a software designed for fast and efficient mobile reading of IZAR radio modules and multi-energy smart meters. Its ergonomic interface makes its use intuitive and user-friendly. Furthermore, the map overview of the meters enables precise guidance during the tour reading. To benefit from all the software functionalities, IZAR@MOBILE 2 can be delivered pre-installed with IZAR TABLET. However, IZAR@MOBILE 2 functions with other Windows operating devices. Connected to IZAR PLUS Portal or IZAR@NET 2 management software, IZAR@MOBILE 2 offers many enhanced features such as planning and management of multiple tours and remote or local data transfer. IZAR@MOBILE 2 operates as well completely independently with its XLSX interface to import or export data. IZAR@MOBILE 2 software can be flexibly adapted to your needs

Datasheet | Read more



IZAR@MOBILE 2 ANDROID

IZAR@MOBILE 2 ANDROID

IZAR@MOBILE 2 Android is a software designed for rapid and efficient mobile reading of IZAR radio modules and multi-energy smart meters. To benefit from all the software functionalities, IZAR@MOBILE 2 is delivered with IZAR HANDHELD Android portable terminal. Its ergonomic and intuitive interface is optimized by the size of its touch display. IZAR@MOBILE 2 software, connected to IZAR PLUS PORTAL or IZAR@NET 2 software, offers many enhanced features such as planning of multiple tours and transfer of remote or local data. IZAR@MOBILE 2 Android software supports also on-site configuration of meters and system devices.

Datasheet | Read more



IZAR PLUS PORTAL

IZAR PLUS PORTAL

IZAR PLUS PORTAL is the Diehl Metering software solution for collecting, managing and analysing multi-energy meters data provided by our different reading solutions, such as mobile, passive drive-by (garbage truck), fixed network or wired M-Bus. The application is accessible 24/7 from any place and operating system thus increasing your flexibility of administering metering data, read out processes and supply network. With its new interface, IZAR PLUS PORTAL is a user-friendly, ergonomic and performant application allowing easy access to your multi-energy metering data (water, thermal energy, gas, electricity ...). In addition to all features for operations, IZAR PLUS PORTAL integrates automatic analyses of your meter data and alarms with a possible e-mail notification. IZAR PLUS PORTAL various versions and capacities offer a suitable response to your needs.

Datasheet | Read more



IZAR PORT PULSE MINI

IZAR PORT PULSE MINI

The IZAR PORT PULSE MINI offers the possibility to connect resource meters with pulse output to an M-Bus network (pulses converter to M-Bus protocol). It is suitable for all meter types with pulse transmitter or open collector output.

Datasheet | Read more



IZAR CENTER

IZAR CENTER

IZAR CENTER is used for the remote reading of M-Bus and IZAR radio-linked meters. Easy to install, IZAR CENTER automatically communicates with the connected meters and memorises their data. IZAR CENTER may be read either by a PC with an RS232, USB or LAN link or by an analog or GSM modem. Connected to a GSM modem, IZAR CENTER sends the data to the FTP server, at programmable intervals. Furthermore, it is able to warn the user in real time of the occurrence of alarms by e-mail or SMS. Connected to an IZAR RECEIVER M-BUS, it can read meters equipped with the IZAR radio.

Datasheet | Read more



IZAR MBUS COMPACT i

IZAR MBUS COMPACT i

The new modules IZAR MBUS COMPACT i are the center of the modular inductive concept developed by Diehl Metering. They can be clipped onto all the meters of the Diehl Metering inductive (Ti) or mixed (Ha+Ti) modular range with grey ring, making them "communicative" in a very easy way. IZAR MBUS COMPACT i provide informations using M-Bus protocol (EN 13757), enabling billing (index…), monitoring (flow rate, direction…) and the management/follow-up of the installation (tampering, cable cut-off and unclipping alarms ….). It may be connected to different systems such as M-Bus or fixed networks, monitoring, or consumption-analysis systems. IZAR MBUS COMPACT i feature a clamping ring for totally secured mounting (sealable cam) and easy reinstallation on another meter.

Datasheet | Read more



IZAR DOSING

IZAR DOSING

IZAR DOSING is an electronic register with reset function specifically designed for industrial applications. IZAR DOSING is fully modular : it can be clipped onto all the water meters of the Diehl Metering modular Ti range (grey ring), whether the meters are already installed or not. Thanks to its reset function, IZAR DOSING can be used in all industrial manufacturing processes requiring precise dosing. IZAR DOSING is easy to read, as it directly indicates the volume of the liquid flow, while leaving the meter's index visible. The generously sized display (10 mm) provides very clear reading. The device operates within a wide range of temperatures (from -20°C to +50°C).

Datasheet | Read more



IZAR BE PULSE

IZAR BE PULSE

IZAR BASE EXTERNAL PULSE is an interface designed to be associated to a pulse emitter and a radio module to function as a remote external radio module. IZAR BE PULSE receives information from a pulse emitter such as an IZAR PULSE i and transmits this information in an inductive mode to the radio module clipped on it, by simulating the rotation of the half-disc of the meter's register. The associated radio module transmits the index and the alarms of the meter via radio link. The lifetime of the module is up to 15 years in standard conditions of use.

Datasheet | Read more



IZAR PULSE i

IZAR PULSE i

The IZAR PULSE i emitters are the center of the modular inductive concept developed by Diehl Metering. They can be clipped onto all the meters of the Diehl Metering inductive (Ti) or mixed (Ha+Ti) modular range with grey ring, making them "communicative" in a very easy way. IZAR PULSE i can manage the flow values in both directions and also features alarms (cable cut-off tampering and unclipping). It may be connected to remote reading or consumption analysis systems. IZAR PULSE i features a clamping ring for totally secured mounting (sealable cam) and easy reinstallation on another meter.

Datasheet | Read more



IZAR OH BT 2

IZAR OH BT 2

IZAR OPTO HEAD BLUETOTH 2 is used for readout and configuration of Diehl Metering meters and system components by optical interface. The data is transmitted via Bluetooth® to mobile or desktop computers.

Datasheet | Read more